Description
  • Rear Spring Specs:
    • C97-147VT (50mm-2") 300-400lb Load
    • C97-145VT (75mm-3") 300-400lb Load


  • Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle
  • Fully re-buildable and re-valvable
  • vZero shock fade in all terrains with full load
  • Superior Designed Nitro Gas Monotube Shocks, thicker walls, longer travel
  • Corrosion resistant (EDP Surface Protection)
  • Direct, bolt-on replacement for easy fitment
  • 60mm hi-flow CNC 6061 Billet alloy piston
  • 2.6" Precision Honed Shock Body
  • Heavy duty single piece lower leg
  • Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • ***Extended Brake lines and Bump stops are highly recommended***
  • 2.5 Inch kit requires 1/2" bump stop extension in the front & 2" bump stop extension in the rear
  • 3.5 Inch Kit requires 1.5-2" bump stop extension in the front & 3" bump stop extension in the rear
  • 2.5 Inch requires front castor bushings& 3.5 Inch requires front castor plates
Description
  • Rear Spring Specs:
    • C97-147VT (50mm-2") 300-400lb Load
    • C97-145VT (75mm-3") 300-400lb Load


  • Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle
  • Fully re-buildable and re-valvable
  • vZero shock fade in all terrains with full load
  • Superior Designed Nitro Gas Monotube Shocks, thicker walls, longer travel
  • Corrosion resistant (EDP Surface Protection)
  • Direct, bolt-on replacement for easy fitment
  • 60mm hi-flow CNC 6061 Billet alloy piston
  • 2.6" Precision Honed Shock Body
  • Heavy duty single piece lower leg
  • Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • ***Extended Brake lines and Bump stops are highly recommended***
  • 2.5 Inch kit requires 1/2" bump stop extension in the front & 2" bump stop extension in the rear
  • 3.5 Inch Kit requires 1.5-2" bump stop extension in the front & 3" bump stop extension in the rear
  • 2.5 Inch requires front castor bushings& 3.5 Inch requires front castor plates
by Dobinsons Spring & Suspension

Dobinsons 2.5-3.5" VT-Series Dual Rate Long Travel IMS Lift Kit for Toyota Land Cruiser 80 Series - DSSKITIMS0019 - DSSKITIMS0019

SKU: DSSKITIMS0019

$4,075.00
$4,075.00
Shipping calculated at checkout.

Check Out These Related Products